roubleshooting Using the Messages 88
3.2 Troubleshooting Using the Messages
This machine does the self diagnosis on the basis of the detection condition in each sensor
and detect abnormal condition with the result and do the display of error condition by the
error message and indicator. If you find out any error massage on LCD, please refer to the
Panel display (Refer to Table 3-1, “Panel display,” on page 89.) and Indicator display
(Refer to Table 3-3, “Indicator Display,” on page 92.), then solve the problem on the
printer.
*1: The service engineer correspondence error
The treatment with the exchangeof the confirmation/corresponding part by service
engineer shows necessary error producing condition.
To Next Page
Loading...
