Epson StylusPro 10000 - Page 89

EPSON Stylus Pro 10000/10000CF Revision B
Troubleshooting
T
roubleshooting Using the Messages 89
Table 3-1. Panel display
LCD message Status Type Reference
PAPER OUT End of roll Error
Table 3-9,
“PaperEnd/End
of roll,” on
page 94
LOAD xxx PAPER Difference with roll paper and sheet Error
Table 3-10,
“Different
paper source is
selected on
panel,” on
page 95
LOAD PAPER Paper set lever is released Error
Table 3-12,
“Paper set lever
is released
(During paper
set position),”
on page 95
PRESS PAUSE
BUTTON
Waiting for paper initialize start
trigger
--
PAPER JAM Paper jam Error
Table 3-13,
“Paper jam,” on
page 95
COVER OPEN Cover open Error
Table 3-14,
“Cover open,”
on page 95
PAPER NOT CUT Paper cutting error Error
Table 3-15,
“Paper cutting
error,” on
page 96
PAPER NOT
STRAIGHT
Paper not straight (Skew error) Error
Table 3-16,
“Paper not
straight,” on
page 96
RELOAD PAPER
Paper check error / Paper eject error
(sheet)
Error
Table 3-17,
“Paper check
error / Paper
eject error
(sheet),” on
page 96
RELOAD PAPER Auto take-up reel failing Error
Table 3-18,
“Auto take-up
reel failed,” on
page 96
INK COMPART.OPEN Replacing ink cartridge Error
Table 3-19,
“Replace ink
cartridge,” on
page 97
INK OUT Ink end
Error /
Warning
Table 3-20,
“Ink end,” on
page 97 /
Table 3-5, “Ink
End,” on
page 93
NO INK CARTRIDGE No ink cartridge
Error /
Warning
Table 3-21, “No
ink cartridge,”
on page 97 /
Table 3-8, “No
Ink Cartridge,”
on page 94
OPTION I/F ERROR Type B interface error Error
Table 3-22,
“Type-B
interface error,”
on page 97
UNABLE TO PRINT CAn not test printing Error
Table 3-23,
“Cannot test
print,” on
page 97
Table 3-1. Panel display
LCD message Status Type Reference