Epson StylusPro 10000 - Page 43

EPSON Stylus Pro 10000/10000CF Revision B
Product Description
S
e
lecType Settings 43
o
Exiting SelecType mode
Select one of the following methods to exit SelecType mode:
n Press the Pause button while in SelecType mode; the printer is ready to print.
n Perform the printer initialization.
n Print a status sheet.
n Print a nozzle check pattern.
n Replace the cutter.
n Press the SelecType button several times at the top level of SelecType menus.
n Press the SelecType button one time at the second level of SelecType menus.