148
When paper is loaded,
it is fed and an error
occurs
For Full-page label,
Continuous paper,
and Transparent full-
page label
The paper you are
using does not match
the [Media detection
settings].
Check the paper you are using and
the printer’s [Media detection set-
tings].
See "Media detection settings" on
page 115.
-
An error has occurred
in the sensor.
If the printer has been working
properly so far, the sensor may be
malfunctioning. Contact your
dealer for repairs.
-
Label gap detection is
not available for fan-
fold paper
For fanfold paper, backing paper
thicker than that of roll paper is
used to avoid paper jam. Therefore,
the gap may not be detected
even when you are using genuine
Epson paper. If this happens, click
[Printer Setting Utility] on the [Printer
Utilities] tab in the printer driver to
display the Printer Setting Utility win-
dow. Select [Printer Adjustment] -
[Sensor Adjustment] - [Adjust the
Label Gap Detection Sensor]. For
details, see "Sensor Adjustment" on
page 136. If the gaps are still not
detected even after adjusting the
sensor, change the detection
method to using black marks.
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...
Need help?
General
