Rev. A Printer Handling I-1
TM-H6000/H6000P Service Manual
Confidential
Appendix I
Printer Handling
Using the Power Switch Cover
WARNING:
If an accident occurs when the power switch cover is attached, unplug the power cord
from the outlet immediately to avoid fire or shock.
You can use the enclosed power switch cover to make sure that the power switch is not
accidentally pressed. The illustration below shows the power switch cover installed.
Figure I-1 Power switch cover
If you need to turn the power on or off when the cover is installed, you can insert a thin tool into
one of the holes in the cover to operate the switch.
To Next Page
Loading...
Need help?
General