Epson TM-H6000 - Appendix A Service Tools and Lubricants

Rev. A Service Tools and Lubricants Appendix A-1
TM-H6000/H6000P Service Manual
Confidential
Appendix A
Service Tools and Lubricants
Table A-1 Service tools required
Tool Size Purpose
Gap gauges <Thickness>
0.45 mm x 1
0.50 mm x 1
To adjust the platen gap.
Crosshead screwdriver No. 0, 1 and 2
Other assembly/
disassembly
Flathead screwdriver — Other assembly/
disassembly
Tweezers — Other assembly/
disassembly
Soldering iron —
Other assembly/
disassembly
Wrist band — Other assembly/
disassembly
E-ring holder 1.5, 2.0, 2.3, 2.5, 3.0, 4.0 and
5.0
Other assembly/
disassembly
Hexagon box driver 5.5 mm Other assembly/
disassembly
Table A-2 Lubricants
Lubricant
O-10
G-36
G-48