Epson TM-H6000 Service Manual

Rev. A Maintenance Appendix B-1
TM-H6000/H6000P Service Manual
Confidential
Appendix B
Maintenance
Maintenance and Inspection
Perform maintenance and inspection to prevent trouble and maintain the fine, initial
performance of this printer for a long time.
There are two types of maintenance and inspection of this printer, based on the technical skill
required: “Daily Inspection” and “Periodic Inspection.”
❏ Daily Inspection ➝ Items that can be inspected easily and handled by a user of this
printer.
❏ Periodic Inspection ➝ Items that are inspected and handled by a person who has technical
knowledge.
Daily Inspection
Table B-1 Daily Inspection Checklist
Items to Check Checkpoints Handling
Printer setup The connector cables are plugged in. Reconnect cables.
The roll paper and ribbon cassette are
properly installed.
Install them properly.
The ribbon is routed properly in the printer.
The ribbon is not damaged. Replace the ribbon cassette.
The receipt roll paper cover and unit
cover are closed.
Close the cover.
The slip front cover is closed.
Paper dust or particles
in the printer
Open the roll paper cover. There should
be no large paper particles or foreign
matter inside.
Remove the paper particles or foreign
objects.
Use an electric vacuum cleaner to clean
thoroughly.
Open the front cover. There should be no
large paper particles or foreign matter
inside.
Remove the paper particles or foreign
objects.
Use an electric vacuum cleaner to clean
thoroughly.

Epson TM-H6000 Specifications

General

Brand	Epson
Model	TM-H6000
Category	Printer
Language	English