8 • Measurement and adjustment
54 / 144
Art.-Nr.: 80116-271
04.06
Test equipment
IMPORTANT! The following list contains the testing and measuring equipment
recommended by ERBE for servicing. Where ERBE article num
-
bers are specified, only original ERBE testing and measuring
equipment should be used.
ERBE
Art.
No.
Description
– PC/laptop WIN 98 or higher
29140-211 VIO HF Adjustment Tool (software, only for inter-
nal use by ERBE)
– Oscilloscope, 100 MHz or higher
(recommended: Tektronix TDS 1012)
– HF power meter
(recommended: Metron QA-ES)
– High Voltage Differential Probe
(recommended: TESTTEC TT-SI 9010,
Tektronix
P5210 or Sapphire SI-9010)
20100-019 Testbox spark monitor, 230 V
20189-101 Dual-pedal footswitch with ReMode
20140-002 VIO Support Hardware (only for internal use by
ERBE)
20192-127
20192-110
Patient cable AE
or
Patient cable AE, international
20194-070
20194-075
Patient cable NE
or
Patient cable NE, international
To Next Page
Loading...
