9 / 144
1 • Safety information
Art.-Nr.: 80116-271
04.06
CHAPTER 1
Safety information
Classification of the safety information
Knowledge of the User Manual
The user manuals relating to the units form part of this service man-
ual. Familiarity with the user manuals, in particular the procedures for
setting up, commissioning and handling described in the manuals, is
a prerequisite for the performance of servicing work.
Protection from the risk of electric shock
WARNING! The WARNING! safety indication refers to a risk of personal injury.
CAUTION! The CAUTION! safety indication refers to a risk of damage to prop-
erty.
ATTENTION! The ATTENTION! safety indication refers to a risk which can cause
equipment to become unserviceable.
IMPORTANT! The IMPORTANT! designation indicates application information
and other particularly important information.
WARNING! The supply voltage must match the voltage specified on the rating
plate. Connect the unit / the equipment cart to a properly installed
grounded outlet. Only use the ERBE power cord or an equivalent
power cord for this purpose. The power cord must bear the
national test symbol.
For safety reasons, multiple outlets and extension cords should
not be used. If their use is unavoidable, they also must be provided
with proper grounding.
WARNING! Unplug the power cord from the outlet before exchanging parts of
the unit or cleaning it.
WARNING! Do not plug a wet power cord into the unit or into an outlet.
WARNING! Do not touch any unprotected wires or conductive surfaces while
the unit is disassembled and is under voltage.
To Next Page
Loading...
