95 / 144
10 • Maintenance and servicing
Art.-Nr.: 80116-271
04.06
CHAPTER 10
Maintenance and servicing
Who is allowed to perform servicing and main-
tenance work?
What is a safety check?
How often does a safety check have to be per-
formed?
ATTENTION! Adjustments, tests, modifications, maintenance and repair work
may only be performed by ERBE or persons trained by ERBE. If
the work is not performed by trained persons, ERBE accepts no
liability and warranty rights become void.
It is recommended that the safety check also be performed by
ERBE or persons trained by ERBE.
IMPORTANT! The safety check is a preventive measure to examine whether the
device is safe and ready for operation. In order to perform the vari
-
ous tests the current specifications and regulations of the particu-
lar country and the instructions in this service manual must be
observed.
IMPORTANT! ERBE recommends performing a safety check after every repair,
but at least once a year.
To Next Page
Loading...
