Introduction to this Guide
2 1553-CNH 160 0787 Uen PA2 2005-09-23
Bold monospace letters mark text typed by the user (input) in Com-
mand Line Interface (CLI).
Regular monospace letters mark text output in CLI.
<ServerIP> is a parameter (argument) that should be replaced with the
actual value (for example, the IP address of a server). The <> symbols
must not be typed.
[argument] the brackets indicate that this argument is optional and can be
omitted. If used, the brackets must not be typed.
{argument1|argument2} means that either argument1 or argument 2
can be used as a value for this parameter.
1.2 Revision History
This guide is valid for EDA 2.2 RA1. Other product version, with functions
not described in this guide may be available.
1.2.1 This Revision
The Command Line Interface (CLI) is updated to reflect the command
structure.
1.2.2 Version G
The following changes were made:
• Minor textual connection added
• Added a section of how to run the ECN as a switch
1.2.3 Version F
The following has been changed:
• The EAN topologies have been revised. The ECN now supports the
FE-E1/T1 converter EXN104 and the ELN220 as embedded nodes.
• The ECN also supports daisy chaining of the optical switch ELN220
and the electrical switch ESN310.
• The ECN supports flexible service access.
To Next Page
Loading...
