Web interface
1553-CNH 160 0787 Uen PA2 2005-09-23
55
9.6 Test
Click Lines in the left menu to open the Line Test Preparation window,
see
Figure 32 on page 55. Select how often the page must be refreshed in
the Refresh Interval box. Check the Toggle boxes for the lines that must
be tested. Click Start Test to start the line test.
Figure 32 Line Test Preparation
The test result shows if the CPE modems are reachable. Starting with the
first line, and so on, see
Figure 33 on page 56. The page will be refreshed
with the interval typed in the Refresh Interval box, see
Figure 32 on page
55 in. The test result table gives the following information for each port No:
• Port No. – Green icon: the test is ok. Red icon: failure in the test. Black
icon: the line has not been tested.
• PVC status - Green icon: the test is ok. Red icon: failure in the test.
Black icon: the line has not been tested.
• DSL link - Green icon: the test is ok. Red icon: failure in the test. Black
icon: the line has not been tested.
To Next Page
Loading...
