Factory Defaults
1553-CNH 160 0787 Uen PA2 2005-09-23
57
10 Factory Defaults
It is possible to reset the ECN to factory a default configuration:
1. Login: factorydefault. Password: factorydefault.
2. Confirm the reset with y.
3. The following options are now available:
a Reset external settings (enter y) will reset all settings including the
external interface. The ECN will be configured as when delivered
from the factory. Any network connection to the ECN will be lost.
The ECN will have to be reconfigured with initial parameters using
the serial port.
b Keep external settings (enter n) will keep the external interface
configuration. Network connection to the ECN will not be lost.
c Enter exit to quit the factory defaults reset without resetting, and
keep all the current configuration.
4. After entering a, b or c further confirmation must be given, see
Figure
34 on page
57.
Figure 34 Resetting ECN to Factory defaults
To Next Page
Loading...
