Command Line Interface
150 1553-CNH 160 0787 Uen PA2 2005-09-23
11.8 show
Table 19 show commands
Command Description Page
dslport
Display configuration data for the ADSL line 150
ecn
Display information of the ECN 151
edn
Display information of the EDN 152
exn
Display general and line configuration data 152
esn
Display esn element identifier 153
system
Display general system configuration data 155
11.8.1 dslport
Use this command to display configuration data for the ADSL line.
Command level: ecn330#.
Syntax
show dslport <dslport> {alarm|line|performance-
data|pvc}
Arguments:
• <dslport> – Insert the DSL-port no. in the format a.b.c, where
the letters refer to the ECN port (a), the ESN108 port (b) and the IP
DSLAM line (c).
• alarm/line - Show alarm configuration or line configuration.
• performance-data - Show an error parameter of the line in the
ADSL, ATM, and Ethernet layers. Different counters count relevant
parameters in each layer.
• pvc - Show PVC configuration for the specified PVC number,
that is from 1 to 8.
Default Setting
None.
To Next Page
Loading...
