Command Line Interface
1553-CNH 160 0787 Uen PA2 2005-09-23
133
ecn330(config system)# backup-configuration terminate
11.6.10.3 calendar
Use this command to set the time and date of the ECN.
Command level: ecn330(config system)#.
Syntax
calendar date <date> time <time>
Arguments:
• date <date> – The date in the format dd.mm.yy
• time <time> – The time in the format hh:mm:ss
Default Setting
No specific setting
Command Usage
This command should only be used if there is no connection to the network
and a central NTP or SNTP server. Using the calendar command stops the
NTP server and client in the ECN. The date and time should be Universal
Time Coordinate (UTC).
Note: When the NTP server is not running, the IP DSLAMs would not be
able to use the remote storage. For more information about the re-
mote storage function, please refer to the IP DSLAM User Guide.
Example
ecn330(config system)# calendar date 21.10.05 time
15:32:30
11.6.10.4 cli-autologout
Use this command to set an interval after which the CLI auto-logs out.
Command level: ecn330(config system)#.
To Next Page
Loading...
