Command Line Interface
132 1553-CNH 160 0787 Uen PA2 2005-09-23
Command Usage
At least one RADIUS server must be configured before enabling RADIUS
authentication, see section
11.6.10.12 on page 142.
Example
ecn330(config system)# aaa authentication login enable
radius
11.6.10.2 backup-configuration
The command is used to store configuration information. The backup file is
placed in /var, and must be fetched manually.
Command level: ecn330(config system)#.
Syntax
backup-configuration {filename <filename>|terminate}
Arguments:
• filename <filename> - The name of the backup file that
must be placed in /var.
• terminate - When the backup file has been fetched, the backup
must be terminated with this command, before a new backup or re-
store can be made
Default Setting
-
Command Usage
The command is used to generate a backup of the configuration informa-
tion from the ECN (EMP) and the embedded elements. The backup file
must be transferred and stored on a chosen place and afterwards the
backup must be terminated.
Example
ecn330(config system)# backup-configuration filename
test1
ftp the backup file
To Next Page
Loading...
