Command Line Interface
1553-CNH 160 0787 Uen PA2 2005-09-23
155
Example
ecn330# show esn 3.0 port 4 spanning-tree
ecn330# show esn 3.0 power-on-uplink
ecn330# show esn 3.0 port 4 phymode
ecn330# show esn 0.1 link-aggregation
11.8.6 system
Use this command to display general system configuration data.
Command level: ecn330#.
Syntax
show system {aaa| calendar| interface|local-management|
ntp|password-length|pem-management|radius-
server|service-vlans|software-versions|vlan-
unaware|cli-autologout}
• aaa authentication login – Show if RADIUS authentication is
enabled or disabled.
• calendar - Show system date and time.
• interface - Show interface configuration.
• local-management - Show local management configuration.
• ntp - Show local management configuration
• password-length - Show minimum length of password.
• pem-management - Show PEM management configuration.
• radius-server – Show configuration parameters of the AAA client.
• service-vlans - Show service VLANs.
• software-versions - Show software versions.
• vlan-unaware - Show VLAN unaware mode.
• cli-autologout – Show Interval after which the CLI auto-logs out
To Next Page
Loading...
