Ericsson ECN320 - Page 135

Command Line Interface
1553-CNH 160 0787 Uen PA2 2005-09-23
127
11.6.6.2 packet-distribution
Use this command to enable or disable packet distribution across the paral-
lel E1 link.
Command level: ecn330(config)#.
Syntax
exn <node> packet-distribution {enable|disable}
Arguments:
• exn <node> – EXN104 node no. in the format a.b
• enable/disable – Enable or disable packet distribution across
E1 links.
Default Setting
-
Command Usage
The command will enable or disable packet distribution across E1 links in
the EXN104.
Example
ecn330(config)# exn 3.100 packet-distribution enable
11.6.6.3 line-type
Use this command to set the line type of the E1 lines.
Command level: ecn330(config)#.
Syntax
exn <node> line-type {esf|d4|e1|e1crc|auto-crc}
Arguments:
• exn <node> – EXN104 node no. in the format a.b