Description of the EAN
36 1553-CNH 160 0787 Uen PA2 2005-09-23
Central Site
Remote Site
ECN
Ericsson
Node=0.0
Node=6.100
Node=2.100
Node=24.2.0
Port 2
Port 24
1 4
1 4
1
12
Node=24.100
Node=6.200
Node=24.200
1
4
Port 18
Port 1
Line No. = 2.0.8
Node=6.200
Node=2.200
Node=2.0
1
12
EDN312
EXN104
EXN104
Node=124.0
Node=18.0
ESN108
Node=6.100
Node=18.101
EXN104
Port 2
Node=124.0
Node=24.0
ESN108
EXN104
EXN104
Node=6.200
Node=18.201
Node=18.1.0
1
12
EXN104
EDN312
EDN312
EPN102
EPN102
EPN102
Line No. = 18.1.8
Line No. = 24.2.8
Figure 17 Nodes Identification with Embedded EXN104 converter
When using the ESN108 remotely in combination with the EXN104 FE/T1
converters the Ethernet Power Node is not necessary because the ESN108
is capable of supplying the nodes with power over the Ethernet cables in
both upstream and downstream direction. The capability of the ESN108
switch to supply power in the upstream direction for a port is not activated
by default. It must be activated in the ECN by a CLI command.
To Next Page
Loading...
