AT Commands Modem Terminated 145
AT+CLAC List All Available AT Commands
ATI Identification Information
Description: Execution command that causes the ME to return one or more lines of AT Commands.
Note: This command only returns the AT commands available to the user.
Execution command: AT+CLAC
Possible response(s): <AT Command1><CR><LF>
[<AT Command2><CR><LF>
[...]]
+CME Error: <err>
<AT Command> Description
AT... Defines the AT command, including the prefix AT
Test command: AT+CLAC=? Shows if the command is supported.
Example: AT+CLAC
AT+CGMI
AT+CGMM
AT+CGMR
...
OK
+AT+CLAC=?
OK
Description: Causes the DCE to transmit one or more lines of information text followed by a final
result code. <value> may optionally be used to select from multiple types of
identifying information.
This command provides compatibility with Microsoft Windows 95.
Execution command: ATI[<value>]
Possible response: <information>
Parameters:
<value>:
<value> Description
0 Same information as AT+GMM
Default setting
1 Same information as AT+GMR
3 Modem model description
5 Active setting.
7 Modem Configuration Profile
Brief listing of the modem functionality: fax classes,
Bluetooth, IrDA, modem type, etc.
<information>: String of characters.
To Next Page
Loading...
