AT Commands Modem Terminated 166
AT+FRS Receive Silence
AT+FTM Facsimile Transmit
Example: AT+FTS=12
OK
AT+FTS=?
(0-255)
OK
Description: Waits for the specified time of silence on the line.
Execution command: AT+FRS=<time>
Test command: AT+FRS=? Shows if the command is supported.
Test command
response:
(list of supported <time>s)
Parameter:
<time>:
<time> Description
0-255 Silence period in units of 10 ms
Example: AT+FRS=12
OK
AT+FRS=?
(0-255)
OK
Description: Starts transmission of fax data at given speed.
Set command: AT+FTM=<MOD>
Test command: AT+FTM=? Shows if the command is supported.
Test command
response:
(list of supported <MOD>s)
Parameter:
<MOD>:
<MOD> Modulation Rate (bits/s)
24 Rec. V.27 ter 2400
48 Rec. V.27 ter 4800
72 Rec. V.29 7200
96 Rec. V.29 9600
Example: AT+FTM=24
CONNECT
OK
AT+FTM=?
(24,48,72,96)
OK
To Next Page
Loading...
