Ericsson T39 - Page 174

AT Commands Modem Terminated 172
AT+FBUG Session Message Reporting
AT+FCQ Copy Quality Checking
AT+FCR Capability to Receive Parameter
Description: Handles session message reporting.
Set command: AT+FBUG=<value>
Read command: AT+FBUG? Displays the current <value> setting.
Test command: AT+FBUG=? Shows if the command is supported.
Test command
response:
+FBUG: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Disables HDLC frame reporting
Default setting
1 Enables HDLC frame reporting
Description: Handles copy quality checking.
Set command: AT+FCQ=[<value>]
Read command: AT+FCQ? Displays the current <value> setting.
Test command: AT+FCQ=? Shows if the command is supported.
Test command
response:
+FCQ: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 No copy quality checking performed
Default setting
Description: Sets the TAE’s capability to receive message data.
Set command: AT+FCR=<value>
Read command: AT+FCR? Displays the current <value> setting.
Test command: AT+FCR=? Shows if the command is supported.
Test command
response:
+FCR: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Can not receive message data, but can be polled