Ericsson T39 - Page 175

AT Commands Modem Terminated 173
AT+FCIG Local Polling ID Parameter
AT+FDFFC Data Compression Format Conversion
1 The TAE can receive message data
Default setting
Description: Sets the local polling ID parameter.
Set command: AT+FCIG=<polling_id>
Read command: AT+FCIG? Displays the current <polling_id> setting.
Test command: AT+FCIG=? Shows if the command is supported.
Test command
response:
(<string length>)(list of supported <polling_id>s)
Parameter:
<polling_id>: ASCII string; 0-20 characters.
Example: AT+FCIG=”Ericsson Fax”
OK
AT+FCIG?
Ericsson Fax
OK
AT+FCIG=?
(20)(32-127)
OK
Description: Handles data format failure check. Determines the response to a mismatch between the
data format negotiated for the facsimile session and the Phase C data desired by the TE.
Set command: AT+FDFFC=<value>
Read command: AT+FDFFC? Displays the current <value> setting.
Test command: AT+FDFFC=? Shows if the command is supported.
Test command
response:
+FDFFC: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Disables mismatch checking
Default setting
<value> Description