Ericsson T39 - Page 176

AT Commands Modem Terminated 174
AT+FDCC TAE Capability Parameters
Description: Allows the TE to sense and constrain the capabilities of the facsimile TAE.
Set command: AT+FDCC=<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
Read command: AT+FDCC? Displays the current <vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, and
<st> settings.
Test command: AT+FDCC=? Shows if the command is supported.
Test command
response:
+FDCC: (list of supported <vr>s),(list of supported <br>s),(list of supported <wd>s),
(list of supported <ln>s),(list of supported <df>s),(list of supported <ec>s),
(list of supported <bf>s),(list of supported <st>s)
Parameters:
<vr>: Vertical resolution.
<vr> Description
0 Normal, 98 lpi (lines per inch)
1 Fine, 196 lpi
Default setting
<br>: Bit rate.
<br> Description
0 2400 bits/s V.27ter
1 4800 bits/s V.27ter
2 7200 bits/s V.29 or V.17, optional
3 9600 bits/s V.29 or V.17, optional
Default setting
<wd>: Page width.
<wd> Description
0 1728 pixels in 215 mm
Default setting
1 2048 pixels in 255 mm
2 2432 pixels in 303 mm
3 1216 pixels in 151 mm
4 864 pixels in 107 mm
<ln>: Page length
<ln> Description
0 A4, 297 mm
Default setting
1 B4, 364 mm
2 Unlimited length
<df>: Data compression format.
<df> Description
0 1-D modified Huffman
Default setting