ESIT Smart-2 - Eco Mode Setting

To Next Page

To Previous Page

SMART-2 Multi Functional Wireless Weighing Indicator User Manual

________________________________________________________________________________________________

Page 16

AVERAGE SETTING

With this value, the number of measurements to be averaged when the

measurement value is displayed on the screen is set. The high average value

increases the measurement quality while the response to small changes is reduced.

(1) Press key until you reach the

'Configuration Settings' menu

(2) Press the key to confirm the menu

(3) Press key until you reach the 'Average'

(4) Press the key to confirm the menu

(5) Set the increment step as you desire with menu key.

then single measurement display

then average with 5 measurements

then average with 10 measurements

then average with 20 measurements

then average with 50 measurements

(6) Press the key to save the changes.

(7) Press the key to go back to the measurement screen.