ESIT Smart-2 - Point-to-Point Communication Setting

To Next Page

To Previous Page

SMART-2 Multi Functional Wireless Weighing Indicator User Manual

________________________________________________________________________________________________

Page 37

COMMUNICATION SPEED (BAUD RATE) SETTING

The number of data bits that can be sent in one second during communication is

called the 'communication speed' (BAUD RATE). For Smart-2 indicators this

speed can be set between 1200 and 28800.

(1) Press key until you reach the

'Communication' menu

(2) Press the key to confirm the menu

(3) Press key until you reach the

'Communication speed' menu

(4) Press the key to confirm the menu

(5) Set the communication speed of your choice with menu key.

then 1200 baud communication

then 2400 baud communication

then 4800 baud communication

then 9600 baud communication

then 14400 baud communication

then 19200 baud communication

then 28800 baud communication

(6) Press the key to save the communication speed setting.

(7) Press the key to go back to the measurement screen.