ESIT Smart-2 - WiFi Station ID Setting

SMART-2 Multi Functional Wireless Weighing Indicator User Manual
________________________________________________________________________________________________
Page 44
WIFI MODE SETTING
With this menu, you can change WiFi mode of the device as Access Point or Station.
One of the devices in the same environment must be in the Access Point, and the
others must be in Station mode. Since the station devices will be connected to the
access point device, first the settings of the access point device must be made and
WiFi feature must be turned on.
(1) Press key until you reach the 'WiFi
settings' menu
(2) Press the key to confirm the menu
(3) Press key until you reach the 'WIFI mode'
menu
(4) Press the key to confirm the menu
(5) Press key until 'AP' is displayed for the
Access Point mode and 'STA' for the Station
mode. The "wait" appears on the display when
either mode is selected.
(6) Press the key to save the WIFI mode setting.
(7) Press the key to go back to the measurement screen.