SMART-2 Multi Functional Wireless Weighing Indicator User Manual
________________________________________________________________________________________________
Page 39
POINT-TO-POINT COMMUNICATION SETTING
Point transmission in communication occurs when 8 bit communication is selected.
The point is transmitted by setting the most meaningful bit of the digit sent as 1.
(1) Press key until you reach the
'Communication' menu
(2) Press the key to confirm the menu
(3) Press key until you reach the 'Point
transmission communication' menu
(4) Press the key to confirm the menu
(5) Set the point transmission as you desire with menu key.
NON-POINT-TO-POINT COMMUNICATION
POINT-TO-POINT COMMUNICATION
(6) Press the key to save the point transmission setting in communication
(7) Press the key to go back to the measurement screen.
To Next Page
Loading...