ESIT Smart-2 - Communication Settings; Communication Mode Setting

SMART-2 Multi Functional Wireless Weighing Indicator User Manual
________________________________________________________________________________________________
Page 32
DAC HIGHEST OUTPUT VALUE (HVAL) SETTING
It is used to determine the value to be obtained from the analogue output for the DAC
maximum value (dmax) to be determined on the screen.
(1) Press key until you reach the 'DAC' menu
(2) Press the key to confirm the menu
(3) Press key until you reach the 'DAC
highest output (HVAL) value' menu "HVAL"
appears on the display.
(4) Press the key to confirm the menu
(5) The last recorded DAC highest output (HVAL)
value will be displayed on the screen and the
thousands digit blinks at the same time
NOTE: WHILE CHANGING THE HVAL VALUE, THE ANALOGUE OUTPUT
VALUE FOR
FOR THAT VALUE CAN BE OBSERVED.
(6) Numeric value of the blinking digit can be increased with
key. The place value can be changes with key.
(7) Press key to save DAC highest output (HVAL) value
(8) Press the key to go back to the measurement screen.