SMART-2 Multi Functional Wireless Weighing Indicator User Manual
________________________________________________________________________________________________
Page 42
BLUETOOTH ID SETTING
With this menu, you can change the Bluetooth ID of the device. BLE IDs of two devices
in the same environment cannot be the same. BLE ID must be one of ASCII equivalents
of 0-9, a-z, A-Z characters.
(1) Press key until you reach the 'BLE
settings' menu
(2) Press the key to confirm the menu
(3) Press key until you reach the 'Change
BLE ID' menu
(4) Press the key to confirm the menu
(5) The last recorded BLE ID will be displayed on
the screen and the hundreds digit blinks at the
same time
065 = hex41= “A”
NOTE: BLE ID can be assigned between 0 and 255 and can be selected only
between 0-9, a-z and A-Z character range
(6) Numeric value of the blinking digit can be increased with key. The
place value can be changes with key.
(7) Press the key to save the BLE ID. "wait" appears on the display.
(8) Press the key to go back to the measurement screen.
NOTE: See page 55 for Bluetooth connectivity from the Android application.
To Next Page
Loading...