SMART-2 Multi Functional Wireless Weighing Indicator User Manual
________________________________________________________________________________________________
Page 33
DAC MAXIMUM OUTPUT (DMAX) VALUE SETTING
This value is used to set the display value corresponding to the HVAL value.
(1) Press key until you reach the 'DAC' menu
(2) Press the key to confirm the menu
(3) Press key until you reach the 'DAC
maximum output (DMAX) value' menu "dMAX"
appears on the display.
(4) Press the key to confirm the menu
(5) The last recorded DAC maximum output
(DMAX) value will be displayed on the screen
and the ten thousands digit blinks at the same
time
(6) Numeric value of the blinking digit can be increased with key. The
place value can be changes with key.
(7) Press the key to save DAC maximum output (DMAX) value.
(8) Press the key to go back to the measurement screen.
To Next Page
Loading...