SMART-2 Multi Functional Wireless Weighing Indicator User Manual
________________________________________________________________________________________________
Page 28
RELAY 1 DELAY TIME SETTING
A delay of up to 5 seconds can be given to set the relay. This delay period is made
with the 'delay time' menu at intervals of 0.2 seconds between 0 to 1 second and
intervals of 1 second between 1 to 5 seconds.
(1) Press key until you reach the 'Relay 1'
menu
(2) Press the key to confirm the menu
(3) Press key until you reach the 'Relay 1
delay time' setting menu
(4) Press the key to confirm the menu
(5) The recorded delay time is displayed on the screen. Set the delay time
as you desire with menu key.
then 0 second delay (without delay)
then 5 seconds delay
(6) Press the key to save the relay 1 delay time.
(7) Press the key to go back to the measurement screen.
To Next Page
Loading...