Need help?Do you have a question about the ESIT Smart-2 and is the answer not in the manual?
Explains the function of each button on the device for navigation and operation.
Details the mounting process for the rail mounting apparatus.
Details the mounting process for the panel mounting apparatus.
Displays serial number and version information of the indicator.
Sets increment step (e), point location, weighing capacity, and unit of measurement.
Adjusts backlight, brightness, average filter size, eco mode, speed, and gain.
Performs zero and load calibrations for the device.
Configures set value, hysteresis, delay time, and contact position for relay 1.
Configures set value, hysteresis, delay time, and contact position for relay 2.
Sets lower/upper values and corresponding display values for analogue output.
Sets communication mode, speed, and data format.
Manages Bluetooth name and on/off settings for the Low Energy module.
Manages WiFi name and on/off settings for the WiFi module.
Performs temperature calibration and compensation for the device.
Restores the device to its factory default settings.
Procedure to display the device's serial number.
Procedure to display the version details of the indicator.
Sets the decimal point location for screen resolution adjustment.
Adjusts backlight brightness and enables auto light on functionality.
Procedure for performing zero calibration on the device.
Sets the value for relay 1 activation and deactivation.
Calibrates the analogue output for use with automation devices.
Sets the communication mode (e.g., NO COMMUNICATION, ADDRESSABLE).
Turns the device's Bluetooth feature on or off.
Turns the device's WiFi feature on or off.
Explains the function of the P2 switch for enabling calibration and settings.
Details the pin connections for the 0-5V analog output.
Details the pin connections for the 4-20mA analog output.
Guides connecting the device to a WiFi network via the Android app.
Allows changing Decimal Point, Step, Capacity, and Unit settings via the app.
Allows setting Backlight Mode, Average Count, Speed, Eco Mode, Gain, and Brightness via the app.
Allows configuring Relay 1 and Relay 2 settings via the app.
Allows configuring LVAL, HVAL, and DMAX settings via the app.
Allows configuring communication mode, identity, parity, baud rate, and bit length via the app.
Guides connecting to a local network using WiFi via the Android app.
General| Category | Measuring Instruments |
|---|---|
| Resolution | 0.01Ω |
| Test Current | 200 mA |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Weight | 0.5 kg |
| Power Supply | 4 x AA batteries |
To Next Page