Need help?Do you have a question about the EtherWAN EW50 and is the answer not in the manual?
General| Model | EW50 |
|---|---|
| Humidity | 5% to 95% (Non-condensing) |
| Device Type | Industrial Ethernet Gateway |
| Power Supply | 12-48V DC, redundant power input |
| Mounting | DIN-Rail |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Ports | 5 x 10/100Base-TX Ethernet ports |
Describes the intended reader of this manual, assuming moderate technical skills.
Lists the revision history and changes made to the document over time.
Provides a general introduction to the EW50 Industrial LTE Cellular Gateway.
Lists the items included in the standard package for the device.
Details the physical components and layout of the gateway device.
Explains the meaning of the status LEDs on the gateway.
Provides important notices and requirements for installation and maintenance.
Provides step-by-step instructions for installing the hardware components.
Configures the Wide Area Network (WAN) and uplink settings for internet connectivity.
Describes the configuration of Local Area Network (LAN) and Virtual LAN (VLAN) settings.
Covers the configuration settings for IPv6 connectivity.
Allows users to add/delete time schedule rules applicable to other functions.
Enables the creation of host groups for services like QoS and Firewall.
Provides settings for adding and configuring external servers.
Covers the management and configuration of digital certificates.
Details serial communication setup using RS-232/RS-485 with Virtual COM and Modbus.
Explains the process of collecting and storing data for analysis and monitoring.
Overview of Virtual Private Network (VPN) functionalities.
Details firewall functions including Packet Filter, MAC Control, and IPS.
Overview of system configuration and management methods.
Manages system settings like password, time, log, and backup/restore.
Configures the embedded FTP and SFTP server for log file retrieval.
Provides tools for network diagnostics and troubleshooting.
Provides tools for managing cellular connections and services like Data Usage, SMS, SIM PIN.
Allows setup of pre-defined events, handlers, and response behaviors.
Provides an overview of the gateway's current status and system information.
Shows the current status of WAN, LAN, and VLAN interfaces.
Displays the status of VPN tunnels, firewall, and MAC control.
Shows the status of SNMP connections and log storage.
Provides statistics on connection sessions, device administration, and cellular usage.
Specifies cellular interface standards, bands, connectors, and SIM slots.
Details Ethernet interface standards, ports, and physical layer specifications.
Specifies the serial port interface details (RS-232/RS-485).
Details the specifications for Digital Input/Output ports.
Specifies power input requirements and consumption.
Lists the various functions supported by the device, including VLAN, VPN, Firewall.
Provides physical dimensions, weight, and mounting specifications.
Specifies operating and storage environmental conditions.
Lists safety, cellular, and emissions regulatory approvals.
Provides contact details for the USA office location.
Provides contact details for the Pacific Rim office location.
To Next Page