To Next Page

To Previous Page

EW50 Industrial LTE Cellular Gateway

1.6 Hardware Installation

This chapter describes how to install and configure the hardware

1.6.1 Mount the Unit

The EW50 series product can be mounted on a wall, horizontal plane, or DIN Rail in a cabinet with the

mounting accessories. The mounting accessories are not screwed on the product when shipped from factory.

Screw the DIN-rail bracket on the product first.

1.6.2 Insert the SIM Card

WARNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE SURE

THAT DEVICE POWER IS SWITCHED OFF.

The SIM card slots are located at the bottom side of the housing. Unscrew and remove the outer SIM card

cover before installing or removing the SIM card. After SIM card is correctly placed, return the outer SIM card

cover to its original position and screw it in place.

Step 1:

Pull the SIM holder in

the direction indicated

by the red arrow to

unlock it.

Step 2:

Lift up the SIM

holder, and insert the

SIM card.

Step 3:

Put the SIM holder back,

and push it in the direction

indicated by the red arrow

to lock it.

EtherWAN EW50 User Manual

Questions and Answers: