EW50 Industrial LTE Cellular Gateway
90
2.5.2 Dynamic Routing
Dynamic Routing, also called adaptive routing, describes the capability of a system, through which routes are
characterized by their destination, to alter the path that the route takes through the system in response to a
change in network conditions.
This gateway supports dynamic routing protocols, including RIPv1/RIPv2 (Routing Information Protocol), OSPF
(Open Shortest Path First), and BGP (Border Gateway Protocol), to establish the routing table automatically.
Dynamic routing can be very useful when there are many subnets in your network. Generally speaking, RIP is
suitable for small networks. OSPF is more suitable for medium networks. BGP is more used for large network
infrastructure.
The supported dynamic routing protocols are described as follows.
To Next Page
Loading...
General