EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
259
6.3.1 Server Configuration
This section allows user to set up the embedded FTP and SFTP server for retrieving log files.
Go to Administration > FTP > Server Configuration tab.
Enable FTP Server
Configuration
Item
Value setting
Description
FTP
Unchecked by default
Check Enable box to activate the embedded FTP Server function.
With the FTP Server enabled, you can retrieve or delete the stored log files via
FTP connection.
Note: The embedded FTP Server is only for log downloading, so no write
permission is implemented.
FTP Port
Port 21 is set by default
Specify a port number for FTP connection. The gateway will listen for incoming
FTP connections on the specified port.
Value Range: 1 ~ 65535.
Timeout
300 seconds is set by
default.
Specify the maximum timeout interval for the FTP connection. Supported range
is 60 to 7200 seconds.
Max.
Connections per
IP
2 Clients are set by
default.
Specify the maximum number of clients from the same IP address for the FTP
connection. Up to 5 clients from the same IP address is supported.
Max. FTP Clients
5 Clients are set by
default.
Specify the maximum number of clients for the FTP connection. Up to 32 clients
are supported.

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English