EW50 Industrial LTE Cellular Gateway
260
Check the Enable box to activate the support of PASV mode for a FTP
connection from FTP clients.
Port 50000 ~ 50031 is set
by default.
Specify the port range to allocate for PASV style data connection.
Value Range: 1024 ~ 65535.
Auto Report
External IP in
PASV Mode
Check the Enable box to activate the support of overriding the IP address
advertising in response to the PASV command.
Check the Enable box to activate the support of ASCII mode data transfers.
Binary mode is supported by default.
Check the Enable box to activate the support of secure connections via SSL/TLS.
Check Enable box to activate the embedded SFTP Server function.
With the SFTP Server enabled, you can retrieve or delete the stored log files via
secure SFTP connection.
Specify a port number for SFTP connection. The gateway will listen for incoming
SFTP connections on the specified port.
Value Range: 1 ~ 65535.