EW50 Industrial LTE Cellular Gateway
306
8.3 Security
8.3.1 VPN Status
Go to Status > Security > VPN tab.
The VPN Status widow shows the overall VPN tunnel status. The display will be refreshed every five seconds.
IPsec Tunnel Status
IPsec Tunnel Status windows show the configuration for establishing IPsec VPN connection and current
connection status.
Displays the tunnel name you have entered.
Displays the Tunnel Scenario specified.
Displays the Local Subnets specified.
Displays the Remote IP/FQDN specified.
Displays the Remote Subnets specified.
Displays the connection time for the IPsec tunnel.
Displays the Status of the VPN connection: Connected, Disconnected, Wait
for traffic, and Connecting.
Click the Edit Button to change IPsec setting, the web-based utility will take
you to the IPsec configuration page. (Security > VPN > IPsec tab)