EasyManuals Logo

EtherWAN EW50 User Manual

Default Icon
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #257 background imageLoading...
Page #257 background image
EW50 Industrial LTE Cellular Gateway
257
6.2.6 Reboot & Reset
For some special reason or situation, you may need to reboot the gateway or reset the device configuration to
its default settings. In addition to performing these operations through the Power ON/OFF, or pressing the
reset button on the device panel, you can do it through the web GUI too.
Go to Administration > System Operation > Reboot & Reset tab.
In the Reboot & Reset window, you can reboot this device by clicking the “Reboot” button, and reset this
device to default settings by clicking the “Reset” button.
System Operation Window
Item
Value Setting
Description
Reboot
Now is selected by
default
Chick the Reboot button to reboot the gateway immediately or on a pre-defined
time schedule.
Now: Reboot immediately
Time Schedule: Select a pre-defined auto-reboot time schedule rule to reboot
the auto device on a designated time To define a time schedule rule, go to
Object Definition > Scheduling > Configuration tab.
Reset to Default
N/A
Click the Reset button to reset the device configuration to its default value.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EtherWAN EW50 and is the answer not in the manual?

EtherWAN EW50 Specifications

General IconGeneral
BrandEtherWAN
ModelEW50
CategoryGateway
LanguageEnglish