Ethos 1.5 Series User Manual

Ethos v1.5.7 and X18, X20 series User Manual
 Screenshot
 Set failsafe
 Play audio
 Haptic
 Write logs
 Play text (X20 Pro only)
 Go to page
 Lock touchscreen
 Load model
 Play vario
Action: Reset
State
Enable or disable this special function.
Active condition
The special function may be 'Always on', or activated by switch positions, function
switches, flight modes, logic switches, trim positions or flight modes.
To select the inverse of for example switch SG-up, if you long press Enter on the
switch name and select the Negative check box in the popup the switch value will
change to !SG-up. This means the special function will be active when switch SG is not
in the up position.
Global
When selecting Global, the special function is added to all existing models and any
new model created in the future. If an existing model already has the function the
global function is added as a new function. Turning off the global function on any
model removes the function from all models except the current model selected.
Global special functions are stored in the radio.bin file, while local ones are stored in
the model file.
Reset
The following categories may be reset:
- Flight data: resets both telemetry and timers
- All timers: resets all 3 timers
- Whole telemetry: resets all telemetry values.
249 rev 2

Ethos 1.5 Series Specifications

General

Brand	Ethos
Model	1.5 Series
Category	Remote Control
Language	English