Ethos 1.5 Series User Manual

Ethos v1.5.7 and X18, X20 series User Manual
Set the calibration value to 12 times this number of seconds, making it negative if your
clock runs fast, and positive if it is slow. For best accuracy, you may then want to check if
your clock is accurate, and adjust the calibration value slightly. The actual calibration value
may be set to -500 to +500.
Auto adjust from GPS
When enabled, the time and date will be automatically set from remote GPS sensor data.
29 rev 2

Ethos 1.5 Series Specifications

General

Brand	Ethos
Model	1.5 Series
Category	Remote Control
Language	English