Ethos v1.5.7 and X18, X20 series User Manual
Trims
The Trims section allows you to configure the trim range and trim step size, or to configure
custom trim behaviour for each of the 4 control sticks. It also allows cross trims and instant
trim to be configured.
The X20 Pro/R/RS and X18 have two additional trim switches T5 and T6, which are very useful
for in-flight adjustments.
Additional trims may be configured as required.
There is a set of Trims settings for each stick.
The X20 Pro and x18 have two additional trims T5 and T6.