Ethos v1.5.7 and X18, X20 series User Manual
Audio actions
Audio actions are very powerful and flexible, allowing the timer alerts to be configured
exactly to the user’s requirements.
In this example three audio actions have been configured:
1. Firstly a countdown to the alarm value starting at 2 minutes remaining will be given
every 30 seconds. The alert will be speech and haptic feedback has also been
enabled.
2. Secondly a countdown starting at 10 seconds remaining, after which a beep will be
played every second. Haptic feedback has also been enabled.
3. Lastly a custom audio file ‘timsup’ will be played when the timer elapses by
reaching the alarm value, accompanied by haptic feedback.
Further audio actions can be added by touching the ‘Add’ button. Please note that the list
should be in priority order, with the highest priority at the end of the list.
To Next Page
Loading...
Need help?
General