Ethos 1.5 Series User Manual

Ethos v1.5.7 and X18, X20 series User Manual
Edit model
The ‘Edit model’ option is used to edit the basic parameters for the model as set up by the
wizard.
Name, Picture
The model can be renamed, or the picture assigned or changed. When browsing for a
picture a preview thumbnail is shown to facilitate locating the correct image.
Model type
Changing the model type will cause all mixes to be reset.
Channel assignments
Changing the tail type, or heli swash plate will cause all mixes to be reset. On the other
channels the number of assigned channels can be changed or unassigned.
68 rev 2

Ethos 1.5 Series Specifications

General

Brand	Ethos
Model	1.5 Series
Category	Remote Control
Language	English