Ethos 1.5 Series User Manual

Ethos v1.5.7 and X18, X20 series User Manual
Switches settings
Switch middle detect delay
This setting ensures that the switch middle position on three way switches is not detected
when the switch is flipped from the up to the down position in one movement, and vice
versa. It should only be detected when the switch stops in the middle position. The
default has been changed to 0ms to suit the FrSky stabilized receivers when detecting
'Self check' on CH12.
Switches SA to SJ may be defined as:
 None
 Momentary
 2 POS
 3 POS
47 rev 2

Ethos 1.5 Series Specifications

General

Brand	Ethos
Model	1.5 Series
Category	Remote Control
Language	English