EasyManuals Logo

Ethos 1.5 Series User Manual

Default Icon
404 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Ethos v1.5.7 and X18, X20 series User Manual
Function switches
The six function switches are available wherever 'Active condition' parameters are found.
Please note that they cannot be used as a source like normal switches can.
Configuration
They may be configured as follows:
6-Pos with OFF
Pressing any function switch will latch that switch ON. However, pressing a switch that
is already ON a second time will turn it off, leaving all six function switches OFF.
6-POS
Pressing any function switch will latch that switch ON until a different function switch
is pressed to latch the newly pressed switch ON.
2 x 3-Pos
Breaks the 6 function switches into two groups of 3. Each group can have one switch
ON.
6 x 2-Pos
Breaks the 6 function switches into 6 latching switches. Each switch can be ON or OFF.
Momentary
Breaks the 6 function switches into 6 momentary switches. Each switch is ON while
depressed.
69 rev 2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ethos 1.5 Series and is the answer not in the manual?

Ethos 1.5 Series Specifications

General IconGeneral
BrandEthos
Model1.5 Series
CategoryRemote Control
LanguageEnglish