Ethos v1.5.7 and X18, X20 series User Manual
Persistent
If enabled, this will cause the function switch to be in the same state when the radio is
turned on or the model is reloaded.
SPort connector
The 5V pin on the SPort connector may be controlled on a model by model basis, to power
for example an external receiver in a trainer application.
Analogs filter
There is a global analog to digital converter filter setting on the Hardware page under
Analogs Filter, which may improve jitter around stick centre. This model specific setting can
be used to override the global setting.
To Next Page
Loading...
Need help?
General