Ethos v1.5.7 and X18, X20 series User Manual
LSW AdaptivePt2: range = 20 to 100%
LSW AdaptivePt3: range = -45 to 45%
LSW AdaptivePt4: range = -90 to -20%
LSW AdaptivePt5: range = -100 to -90%
Set up a logic switch AdaptivePt2 with the flap (i.e throttle) stick as source, and a
range of 20% to 100%. Making the range up to 100% allows adjustment of point 2
even with no flaps. Please refer to the setup explanation in step 6 below.
Set up a logic switch AdaptivePt3 with the flap (i.e throttle) stick as source, and a
range of -45% to 45%.
Set up a logic switch AdaptivePt4 with the flap (i.e throttle) stick as source, and a
range of -90% to -20%.