MAINTENANCE MANUAL
Page 33-4
Effectivity: All
Edition 2 | Rev. 1
FLIGHT COMPARTMENT
1. DESCRIPTION AND OPERATION
A. VFR day
The cockpit is illuminated by an adjustable lamp on the cockpit canopy frame. Use the switch
COCKPIT LIGHT to control the lamp. This switch is located in the row of switches.
Use the switch POS. LIGHTS in the row of switches to switch the instrument lighting on
together with the position lights. The circuit of the instrument lighting is powered by the
controlled power source. The power source is located on the rear right side of the firewall.
You can regulate the intensity of the instrument lighting with the potentiometer INSTR. LIGHT
DIM in the left upper section of the instrument panel.
B. VFR day / night
The cockpit is illuminated by an adjustable lamp on the cockpit canopy frame. Use the switch
COCKPIT LIGHT to control the lamp. This switch is located in the row of switches. All the
switches on the instrument panel have integrated internal illumination.
The instrument lighting and switches are switched on by switching the DAY-NIGHT switch to
the NIGHT position. The switch is located in the left upper section of the instrument panel. The
circuit of the instrument lighting is powered by the controlled power source. The power source is
located on the rear right side of the firewall. You can regulate the intensity of the instrument
lighting with the potentiometer INSTR. LIGHT DIM in the left upper section of the instrument
panel.
Instrument panel lighting is made of the LED strip located on the bottom part of the instrument
panel cover. The instrument panel lighting is switched on by switching the DAY-NIGHT switch
to the NIGHT position. You can regulate the intensity of the instrument panel lighting with the
PWM dimmer INSTR. LIGHT DIM in the left upper section of the instrument panel.
For the interior lighting wiring diagram, refer to Chapter 91.
To Next Page
Loading...